An 85 inch TV is a showpiece — and a serious piece of hardware. A screen that size can weigh 100 pounds or more, so the margin for error when mounting it is small. Here is how the job is done safely, whether you hire it out or attempt it yourself.
1. Respect the weight
Big TVs fail in two ways: the mount is underrated, or the mount is fine but the wall anchoring is not. Always confirm your mount's weight rating exceeds the TV's actual weight, and never rely on drywall anchors alone for a screen this large.
2. Mount into studs — always
An 85 inch TV must be lagged into wood studs (or proper masonry anchors on brick or block). That usually means hitting two studs, 16 inches apart. If your chosen spot does not line up with studs, a mount with a wide rail or a plywood backer is used to bridge them. Guessing here is how TVs end up on the floor.
3. Match the mount to the TV (VESA)
Check the VESA pattern — the spacing of the threaded holes on the back of the TV. An 85 inch set typically uses a large VESA pattern (often 600x400mm), so the bracket has to match. A mount that is too small simply will not bolt on.
4. Make it a two-person job
Lifting an 85 inch TV onto a wall bracket is genuinely a two-person task. One person guides and holds while the other seats and locks the screen. Doing it solo risks both injury and a cracked panel.
5. Plan the wires before you lift
Connect and test your cables, then plan concealment, before the TV goes up — reaching behind a mounted 85 inch screen is no fun. For the cleanest result we route cables inside the wall so nothing shows.
6. Know when to call a pro
If you are not certain about your studs, your mount rating, or your wall type, a large TV is the wrong place to learn. A professional install protects both the screen and your wall — and usually takes about an hour.
We mount large-format TVs every week across Columbia, Charleston, Charlotte, and Boston. Get a free quote or see our TV mounting service.